Cleaning Your Cimbali S30 Coffee Machine

Cleaning your Cimbali S30 coffee machine on a regular basis helps to keep it in tip top condition. London Coffee Machines animated cleaning guide will guide you through the process step by step.

CimbaliS30-cleaning
Need help with your Cimbali Coffee Machine call 0208 111 1122 or email us

How to clean your Cimbali S30 Coffee Machine

Need some help? our in-house team of technicians are on hand to solve any problems that you may have with your Cimbali S30 Bean to cup Coffee Machine, or any of our other other rental or Lease coffee machines.

Our typical response time to fault calls is less than one working day.

Steps to Cleaning your Coffee machine:

COMPLETE WASH CLEANING CYCLE – CLEAN FREQUENCY = DAILY DEPENDING ON VOLUME

The complete wash lasts approx. 15 minutes and cleans all the circuits.

On the Touch screen, Press the Icon in top right corner Access the drop-down menu.

Press the water cleaning icon (step 1).

CG-CimbaliS30-001

Select the complete wash icon (step 2).

CG-CimbaliS30-002

Confirm by pressing green circle icon (step 3).

CG-CimbaliS30-003

Open the decaf door on the top of the machine and use the blister pack to pop out tablet. Avoid contact with hands from the cleaning tablet. Confirm by pressing green circle icon (step 4) on screen to start the wash sequence.

CG-CimbaliS30-004

MILK WASH PARTS – CLEAN FREQUENCY = DAILY DEPENDING ON VOLUME

Next Up, continued from above:

Follow on screen instructions for milk wash parts.

The screen now prompts you to place the Wash Box in position on the machine drip tray (step 1).

Press the green tick on screen to confirm the wash box is in place (step 2).

Next open the fridge, removing the milk container, remove milk pipe from milk and secure in wash box (step 3).

Ensure the coffee nozzle is lowered onto wash box & Lower water nozzle into wash box (step 4).

Gentle Squeeze the Ecocleaner bottle to create a measured dose.

Pour into the left handside of the wash box.

Confirm all the prompts on the screen. This will activate the cleaning cycle.

Washing starts and the progress bars below will show when it is completed. It runs for approx. 15′.

CG-CimbaliS30-005

CUP TRAY – EMPTY AND CLEAN FREQUENCY = DAILY DEPENDING ON VOLUME

To remove it, grip and pull the basin lifting it slightly and pull out towards you, the grill seperates for cleaning.

After you Remove the drip tray, switch off the machine. This is for safety while you are cleaning the machine.

Do not use abrasive products; do not put in the dishwasher.

At the end of the working day, pour a jug of hot water into the basin to remove any encrustation in the drain; remove it and wash it with running water.

CG-CimbaliS30-006

GROUNDS DRAWER – EMPTY AND CLEAN FREQUENCY = DAILY DEPENDING ON VOLUME

To remove, lift the hot water dispensing spout (step 1).

Note: the need to empty the grounds drawer is also highlighted by the icon on the touch screen.

Pull out the grounds drawer, empty it and wash it under running water. Thoroughly clean the drawer housing area with a damp cloth, removing any organic residue.

CG-CimbaliS30-007

TOUCH SCREEN & BODYWORK – CLEAN FREQUENCY = DAILY DEPENDING ON VOLUME

To avoid accidental activation of the touch screen during cleaning (If the machine isn’t turned off):

1. Select the icon related to cleaning the touch screen.
2. Press the icon displayed at the center of the screen.
3. A 15-second countdown will begin in which to clean the touch screen.

Warning: to clean the touch panel, use only a dry anti-static microfibre cloth.
Do not use, detergents or liquids in general; paper or rough cloths.

 

Bodywork

Warning: the shiny parts of the bodywork must be cleaned using a soft cloth and cleaning products WITHOUT ammonia or abrasives, removing any organic residue present in the work area. In the case of tough dirt, use a damp sponge and dry with a soft cloth.

Also wipe the inside parts of the coffee machine while the parts are removed.

If the spouts are dirty clean with a brush and hot water. Dry wipe spouts after cleaning.

Note: DO NOT spray liquid in the slots of the body panels and DO NOT use paper or rough cloth for cleaning.

CG-CimbaliS30-008

COFFEE HOPPERS – CLEAN FREQUENCY = WEEKLY DEPENDING ON VOLUME

The coffee hoppers must be cleaned regularly, roughly once a week. Depending on consumption and the type of coffee, more frequent cleaning may be required.

To clean, proceed as follows:
1. Pull the hopper slide towards you.
2. Detach the coffee hopper from the machine.

Remove any coffee remaining in the hopper. Wash with a damp cloth and the products and methods normally used for articles in contact with food; rinse thoroughly and dry, removing any organic residue.
Before replacing the hopper on the grinder/dispenser, ensure that wet or moist parts are completely dry.

CG-CimbaliS30-009

CLEANING THE SOLUBLES CIRCUIT (WHERE PRESENT) – CLEAN FREQUENCY = WEEKLY DEPENDING ON VOLUME

Press the release button and open the front panel.

CG-CimbaliS30-010

Press the white powder shut off (step 1).

Pull the hopper release towards you (step 2) and lift out hopper (step 3).

CG-CimbaliS30-011

Remove the mixing bowl pipe (step 1), pull towards you.

Rotate the locking mechanism clockwise (step 2).

Pull the mixing bowl out towards you (step 3).

Once removed the Mixing bowl splits into two parts for cleaning.

CG-CimbaliS30-012

Separate the powder funnel. Pull out the powder vent deposit drawer (step 1) it splits into two for cleaning..

Place ½ litre of cold water in the container and add a dose of liquid detergent (see product instructions).

Wash the individual parts, removing any organic residue with a sponge.

Soak all the mixer parts in the solution (water + detergent) for at least 15 minutes.

Remove all parts from the solution and rinse.

CG-CimbaliS30-013

SOLUBLES HOPPER – CLEAN FREQUENCY = WEEKLY DEPENDING ON VOLUME

Remove any soluble powder remaining in the hopper. Wash with a damp cloth and the products and methods normally used for articles in contact with food; rinse thoroughly and dry, removing any organic residue. Before replacing the hopper on the machine, make sure that wet or moist parts are completely dry.

At the end of cleaning, replace all parts previously removed. And open Powder shut off when replacing.

CG-CimbaliS30-014

MACHINE WASHES

The machine includes various types of wash
cycles:
SHORT GROUP WASH
GROUP WASH
MILK WASH
SOLUBLES WASH
COMPLETE WASH
SOLUBLES WASH INFO (the steps for performing cleaning the mixer are shown)
SCREEN CLEANING

1. Select the icon to see the associated menu.
2. BLANK

NOTE: moving the switch, visible during washing cycles, makes it possible to establish whether the machine must be switched off at
the end of the cycle: red background (pre-set): the machine continues to operate; green background: the machine switches off.

SHORT GROUP WASH (duration, approx. 1′)
1. Select the icon for short group wash.
2. Press the icon to start the wash cycle.
3. On the touch screen the short group wash symbol appears, and remains visible for the entire cycle. This stage ends when the progress bar below is filled.

GROUP WASH (duration, approx. 7′)
1. Select the icon for group wash.
2. Press the icon
3. Insert a cleaning tablet into the decaf tube, as shown on the touch screen.
4. After closing the decaf door, press the icon to start the wash cycle.
5. On the touch screen the group wash symbol appears, and remains visible for the entire cycle. This stage ends when the progress bar below is filled.

MILK WASH (duration, approx. 12′)
1. Select the icon for the milk circuit wash.
2. Press the icon
3. The steps for performing a milk wash are shown on the touch screen; at the end of each phase, press the icon
4. Blank?
5. On the touch screen the milk circuit wash symbol appears, and remains visible for the entire cycle. This stage ends when the progress bar below is filled.

SOLUBLES WASH (duration, approx. 30”)
1. Select the icon for the solubles circuit wash.
2. Press the icon to start the wash cycle.
3. On the touch screen the solubles wash symbol appears, and remains visible for the entire cycle. This stage ends when the progress bar below is filled.

COMPLETE WASH (duration, approx. 15′)
Instructions on methods to carry out the complete wash are found in the “Cleaning and maintenance” section.

SOLUBLES WASH INFO
1. Select the icon for information about the solubles circuit wash.
2. The steps for performing cleaning the mixer are shown. After each instruction, press the icon.
3. After all the instructions, the touch screen shows the start of the solubles circuit wash.
NOTE: additional instructions regarding mixer cleaning are found in the “Cleaning and maintenance” section.

SCREEN CLEANING
Instructions on methods to clean the touch screen are found in the “Cleaning and maintenance” section.

AUTOMATIC WASHING OF MILK AND SOLUBLE CIRCUITS (duration, approx. 30”)

NOTE. Activation and configuration of these washes are carried out by the installation technician.
With this function activated, every time milk or soluble dispensing is completed, the time counter starts counting
(0-99′). After completing this, the display shows the screen indicating the seconds remaining before the wash cycle begins:

The cycle activates automatically after 30″.
During this interval:
• if the key is pressed, the automatic wash is done immediately;
• if the key is pressed, the wash is postponed. During this interval:
– if a dispensing key other than milk/soluble is pressed, the counter will start again from the minute after dispensing is completed;
– if a milk/soluble dispensing key is pressed, the counter will start again from the maximum time (0-99′).

AUTOMATIC PRE-SET WASH only for machines with cappuccino maker (duration, approx. 30”)
In addition to the previous washes, there is also the wash known as NSF.
Operation: Every time milk dispensing is completed; the time counter starts (210′). When the ends, the display shows the screen indicating the time before the wash cycle will begin:

• if the key is pressed, the wash is postponed. During this interval:
– if a coffee dispensing key is pressed, the counter will start again from the minute after dispensing is completed;
– if a milk/cappuccino dispensing key is pressed, the counter will start again from the maximum time (210′).
Selection block: always inactive; the wash is done even without any action by the user.
Wash type: with water, completely automatic.

Activation: it activates automatically after 30″.
During this interval:
• if the key is pressed, the automatic wash is done immediately;

Special conditions
1) every wash cycle with detergent (at set hours) or of daily type: in this case, the entire circuit is washed. Therefore, until the first milk-based dispensing is done, the circuit is believed to be free of any residual milk and the time counter (210′) does not start.
2) every machine switch-off with time counter (210′) running: the next switch-on, if 210′ have passed, the machine starts the preset automatic wash cycle once the service temperature is reached.