Cleaning your Flavia Creation coffee machine on a regular basis helps to keep it in tip top condition. London Coffee Machines animated cleaning guide will guide you through the process step by step.
Cleaning your Flavia Creation Coffee Machine
Need some help? our in-house team of technicians are on hand to solve any problems that you may have with your Creation 500 Coffee Machine, or any of our other other rental or Lease coffee machines.
Our typical response time to fault calls is less than one working day.
Steps to Cleaning your Creation 500 Coffee Machine:
DRIP TRAY & CUP STAND = DAILY DEPENDING ON VOLUME
Step 1. Pull the drip tray towards you slightly lift out the empty drip tray. CAUTION! CONTENTS MAY BE HOT.
Step 2. Separate TOP AND BOTTOM PARTS. Clean them in warm soapy water, wipe area left by the drip tray and then Reassemble and replace carefully.
Notice – The upper painted, half of the drip tray is NOT dishwasher friendly. Wash by hand only.
The brewer does not tell you when the drip tray is full so make sure you check it regularly.
EMPTYING THE FRESHPACK BIN = DAILY DEPENDING ON VOLUME
The freshpack bin should be emptied and cleaned on a daily basis. The brewer will request that the freshpack bin is emptied if the maximum number of allowable packs has been vended.
Remove the drip tray as above. Then Pull bin forward and once removed Empty freshpack bin and Clean in warm, soapy water. Then Replace freshpack bin.
Notice – Take care when removing the freshpack bin. The act of removing the bin reset the bin counter. ALWAYS EMPTY THE BIN IF REMOVED.
CLEANING THE WATER FILLER FUNNEL = WEEKLY DEPENDING ON VOLUME
Step 1. Open the lid on top of the coffee machine and, Step 2. remove the small white water filler strainer. Once removed Clean in warm soapy water making sure to rinse thoroughly (so no soap get into the tank).
Use a clean damp cloth to wipe the outside areas that are exposed inside.
Once finished Replace the water filler strainer and close the filler cap.
Notice – Do not use strong detergents and take care not to get soapy water into the water tank as this will affect the drink taste.
CLEANING THE FRESHPACK DOOR = WEEKLY DEPENDING ON VOLUME
To remove the freshpack door for cleaning, Step1. Grip the bottom of the freshpack door. Step 2. Use other hand to steady the brewer.
Now Pull the bottom of the freshpack door sharply towards you until it separates from the machine and carefully remove. Wash in warm soapy water and rinse thoroughly.
Wipe sides of area where door was. To Replace door – Position the Top first. and then push bottom of door until you hear a ‘CLICK’.
CLEANING THE CUP SENSOR = WEEKLY DEPENDING ON VOLUME
The cup sensor is found next to the drip tray on the machine. Clean the cup sensor to ensure correct operation.
CLEANING THE AIR DUCT = WEEKLY DEPENDING ON VOLUME
Remove the freshpack door (as above). Ensure air duct is clean and free of debris.
After cleaning, sanitise surfaces with a non-chlorine based anti-bacterial wipe or solution.
Notice – Avoid scented products, as this will affect the drinks taste.